Specs that matter
Tell John these first. They decide which trucks are worth a look.
- Body length and material
- Steel for rock and demolition, aluminum to save weight on lighter loads. Know the length your work needs.
- GVWR and axle ratings
- The rating on each axle sets what you can carry. State bridge laws decide what is legal on the road.
- Engine and transmission
- Horsepower and gearing for your grades and loads. Many buyers want an automated or Allison automatic for stop-and-go work.
- Lift axle setup
- Air-lift pusher or tag axle, and whether it steers. It changes how the truck turns loaded and empty.
What to check before you buy
These are on top of the usual checks in the buyer’s guide: frame, engine history, records, tires and title.
| Check | What to look for |
|---|---|
| Body and floor | Thin spots, cracks and patched welds in the floor and sides. Check the tailgate hinges and latches. |
| Hoist and hydraulics | Raise the body full height loaded if you can. Watch for drift, leaks at the cylinder and a slow or jerky lift. |
| Lift axle | It should raise and lower cleanly. Check the air bags, the controls in the cab and tire wear on that axle. |
| PTO and pump | Listen for noise when the PTO is engaged. Look for leaks at the pump and lines. |
| Frame | Cracks or repairs near the hoist mount and rear crossmembers, where a loaded body puts the most stress. |
| Hours and duty cycle | Dump trucks idle and run the PTO a lot. Engine hours often say more than miles. See the dump truck checklist. |
How John finds one
John doesn’t keep a lot full of trucks. He works through dealers and fleets he has known for decades, so the right truck is often one that isn’t posted anywhere yet.
- 1. Tell John the job
- What you haul, how far, the specs above and your budget.
- 2. Review the options
- He sends trucks that fit, with photos and the details he has confirmed.
- 3. Confirm before you travel
- Inspection, paperwork and getting it home are settled before money changes hands.
- One person the whole way
- You talk to John, not a call center. See how buying works.
Common questions
What is a tri-axle dump truck?
A dump truck with three rear axles, usually two drive axles and a lift (pusher) axle that drops down when the truck is loaded. With the steer axle, it rides on four axles in total.
How much can a tri-axle dump truck haul?
It depends on the axle ratings, the body and the state. Bridge laws set the legal weight on the road, and they differ from state to state. Ask your state DOT before you count on a number.
Do I need a CDL for a tri-axle dump truck?
Almost always. A tri-axle dump truck is rated well over 26,001 pounds GVWR, which is the federal line for a Class B CDL. Check your state for any added requirements.
Tandem or tri-axle?
A tandem is lighter and turns tighter. A tri-axle carries more where it is legal. If your loads are heavy and your routes allow it, the tri-axle usually pays for itself.
Can John find one in another state?
Yes. Most of John’s sales are outside Iowa. He finds the truck, confirms the details, and helps sort out paperwork and getting it home before you travel.


