Specs that matter
Tell John these first. They decide which trucks are worth a look.
- Deck length and type
- Flatbed, stake bed or dovetail. Measure your longest load and add room to strap it down.
- GVWR
- At 26,000 pounds GVWR or less, a driver generally doesn’t need a CDL. Above that, a Class B CDL applies.
- Tie-downs and extras
- Stake pockets, rub rail, winch track, headache rack, toolboxes or a liftgate. Each one saves time on the job.
- Engine and transmission
- Gas or diesel, automatic or manual. Match it to your loads and how far you run.
What to check before you buy
These are on top of the usual checks in the buyer’s guide: frame, engine history, records, tires and title.
| Check | What to look for |
|---|---|
| Deck | Rot or soft spots on a wood deck, cracks or bent crossmembers on steel. Check that the deck sits flat. |
| Stake pockets and rub rail | Bent or broken pockets and a torn rub rail mean the truck has been loaded hard. |
| Headache rack | Bent or pushed forward means a load shifted into it. Check the cab behind it too. |
| Frame under the deck | Look for cracks and welded repairs, especially near the rear overhang. |
| GVWR label | Read the label on the driver’s door jamb. It decides the CDL question and what you can legally carry. |
| Lights and wiring | Marker and tail lights on a flatbed take a beating. Check every one. |
How John finds one
John doesn’t keep a lot full of trucks. He works through dealers and fleets he has known for decades, so the right truck is often one that isn’t posted anywhere yet.
- 1. Tell John the job
- What you haul, how far, the specs above and your budget.
- 2. Review the options
- He sends trucks that fit, with photos and the details he has confirmed.
- 3. Confirm before you travel
- Inspection, paperwork and getting it home are settled before money changes hands.
- One person the whole way
- You talk to John, not a call center. See how buying works.
Common questions
Do I need a CDL to drive a flatbed truck?
It depends on the GVWR. A single truck rated 26,000 pounds or less generally doesn’t need a CDL. One rated 26,001 pounds or more needs a Class B. Pulling a trailer can change the answer. Check your state.
What is the difference between a flatbed and a stake bed?
A stake bed is a flatbed with pockets along the edges that hold removable stakes or side panels. The sides keep loose loads in. A plain flatbed is open, for loads strapped or chained down.
What deck length do I need?
Measure the longest thing you haul and add room to secure it. Common straight-truck decks run from about 12 to 26 feet. A longer deck needs a longer wheelbase, which turns wider.
Can a box truck be converted to a flatbed?
Yes, it is done often. The cost and the GVWR label still matter. Ask John whether a converted truck or a factory flatbed makes more sense for your work.
Can John find one in another state?
Yes. Most of John’s sales are outside Iowa. He finds the truck, confirms the details, and helps sort out paperwork and getting it home before you travel.


