Skip to content

Call John Mravinac directly. Davenport, Iowa, on Interstate 80.

Used Truck Dealer

The DOT annual inspection on a used truck.

Published by Used Truck Dealer

A commercial truck needs a safety inspection at least once every 12 months. The latest report is one of the first things to ask for.

The annual inspection checks the brakes, steering, suspension, frame, tires, lights and the other safety items on a federal list. It tells you the truck passed those checks on one day. It doesn’t tell you how the engine or the transmission will hold up, so it works alongside a pre-purchase inspection, not in place of one.

The rule

Federal rules in 49 CFR 396.17 call for every commercial motor vehicle they cover to pass a periodic inspection at least once every 12 months.

Which trucks
Generally, trucks rated 10,001 pounds or more that run in interstate commerce. That takes in most box trucks, day cabs, sleepers and dump trucks doing paid work across state lines.
How often
At least once every 12 months. A truck can’t go back to work under these rules once its last inspection is more than a year old.
Who inspects
An inspector qualified under 49 CFR 396.19, usually at a truck shop. Some states run their own programs that the FMCSA accepts in its place.
In-state only trucks
A truck that never leaves its home state follows that state’s rules, which can differ. Ask your state.

How the rule applies depends on the truck and the work. Check the full text of Part 396 or ask the FMCSA. This guide is general information, not legal advice.

What it covers

The minimum list is in Appendix G to the federal rules. These are the main groups an inspector works through.

SystemWhat gets checked
BrakesService and parking brakes, drums or rotors, linings, hoses and the air system.
Coupling devicesFifth wheel, pintle hooks and safety devices.
Exhaust and fuel systemsLeaks, mounting and anything that could reach the cab or a hot surface.
LightsEvery required lamp and reflector works and is mounted where it should be.
Steering and suspensionSteering lash, the gear box, springs, U-bolts, axle positioning parts and air suspension.
FrameCracks, sagging, loose or missing fasteners and bad welds.
Tires, wheels and rimsTread depth, cuts and bulges, cracked rims and loose or missing lug nuts.
Windshield and wipersCracks in the driver’s view and wipers that clear the glass.
A mechanic working under the frame of a truck on a lift

Reading the report on a used truck

Ask for the latest report before you look at anything else on the paperwork.

The date
A recent date means less to sort out before the truck works. An old or missing report means you should plan on an inspection right after you buy.
The VIN
Check that the report is for this truck. The VIN on the report should match the door label and the title.
What was repaired
Look for items marked as repaired to pass. Brakes and tires are routine. Frame or steering work is worth a closer look.
Who did it
The shop name and the inspector. A report from a shop you can call is worth more than a decal with no paper behind it.

The carrier keeps the report, and a copy or a decal rides on the truck. If neither turns up, assume the truck needs a fresh inspection.

What the annual doesn’t tell you

It is a safety check, not a condition report.

Engine and drivetrain
Blow-by, oil leaks, the clutch and the transmission aren’t on the list. The miles and engine hours guide covers what to ask for.
Emissions health
A truck can pass with a DPF close to plugging. See DPF, DEF and EGR.
How long parts will last
Brakes and tires that pass today can still be close to the line. Look at the numbers, not just the pass.
The title and the history
The inspection says nothing about liens, salvage history or past wrecks. The buyer’s guide covers those checks.

Common questions

How often does a commercial truck need a DOT inspection?

At least once every 12 months, under 49 CFR 396.17, for commercial motor vehicles that fall under the federal rules. States set their own rules for trucks that only run inside the state.

Does a passed annual inspection mean the truck is in good shape?

It means the safety items on the list passed on that day. It doesn’t cover the engine, the transmission, the emissions system or how long the parts will last. Still have a diesel shop look the truck over.

How do I prove a truck has passed?

The carrier keeps the inspection report, and a copy of the report or a decal goes on the truck. Ask the seller for the latest report and look at the date.

Who can do a DOT annual inspection?

An inspector who meets the qualifications in 49 CFR 396.19, usually at a truck shop. Some states run their own inspection programs that the FMCSA accepts in its place.

Is a roadside inspection the same thing?

No. A roadside inspection by an officer is a separate check. It doesn’t replace the annual inspection.

The annual on the truck I want has run out. Is that a problem?

Not on its own, but it has to be done before the truck goes back to work under the federal rules. Get it done by a shop you trust, and treat what they find as part of the price.

Questions about a truck’s paperwork?Ask John.

(563) 529-1538
Call John Find my truck

Have John call me

Leave your number and the best time. This goes to John.

We use your details to answer this request. Privacy policy